Toshiba Error Codes, Check Codes Explained for Sydney Homes
Toshiba error codes, which Toshiba calls check codes, are short two character messages that point to the part of your air conditioner that needs attention.
This guide explains how to read them, groups the common codes by type and links to a detailed page for each one, so you understand the problem before you pick up the phone.
What are Toshiba error codes and check codes?
Toshiba wall split systems constantly monitor temperatures, currents, fan speeds and communication between the indoor and outdoor units. When a reading moves outside its safe range, the board stops or limits the system and stores a check code. That code identifies the area of the fault, such as a sensor, a fan, the compressor drive or the link between the units.
Unlike some brands, Toshiba RAS wall units do not always show the code on the indoor unit itself. Instead, the indoor lamps flash, and you read the code through the remote control. Our check codes guide shows the full process.
How do you read a code on a Toshiba wall unit?
Most Toshiba wireless remotes have a small recessed CHECK button. Press it with the tip of a pencil to put the remote into service mode, and the display shows 00. Next, step through the codes using the temperature or timer buttons. When the remote reaches the stored fault, the indoor unit beeps for several seconds and its lamps flash quickly. The two characters on the remote at that moment are your check code.
Afterwards, leave service mode as the remote instructions describe. The code stays stored in the indoor unit for the technician.
Why should you read the code before switching off?
Toshiba guidance warns that turning off the power before reading the code may clear the stored fault. Once cleared, the technician loses a useful clue and may need more time to find the cause. So read and note the code first, then switch the unit off at the remote if needed.
How are Toshiba codes written?
Toshiba check codes use digits and the letters A to F, written as two characters. Some letters appear in lower case on the display, such as 0d and 1b, while others appear as capitals, such as 0C and 1A. On our site, each code has its own page, which you can reach from the lists below.
If your remote shows something that looks different, write it down exactly and call us. Ducted and cassette Toshiba units with wired controllers can display codes in other formats.
Which codes relate to indoor sensors?
These codes point to the temperature sensors inside the indoor unit.
- 0C means the TA room air sensor has an open or short circuit.
- 0d means the TC indoor coil sensor has an open or short circuit.
Indoor sensor faults are usually affordable to repair, since thermistors are small, inexpensive parts.
Which Toshiba error codes relate to the indoor unit itself?
These codes point to the indoor fan and the indoor control board.
- 11 means the indoor fan motor has a problem.
- 12 means the indoor control board has a problem.
- 08 means the indoor coil temperature moved the wrong way for the selected mode.
Code 08 often traces back to the reversing valve in the outdoor unit, even though the indoor coil shows the symptom.
Which codes relate to communication?
These codes mean the indoor and outdoor units have stopped talking normally.
- 04 means the units have lost communication, which can include the compressor thermostat opening.
- 05 means the indoor and outdoor units have lost communication.
- 07 means the units have lost communication, which can include the compressor thermostat opening.
Wiring, terminals, power to the outdoor unit and the boards at both ends are the usual suspects. Codes 04 and 07 can also come from a compressor overheating and tripping its protector.
Which codes relate to outdoor sensors?
These codes point to temperature sensors in the outdoor unit.
- 18 means the TE or TS sensor has an open or short circuit.
- 19 means the TD discharge sensor has an open or short circuit.
- 1b means the TE outdoor coil sensor has failed.
Outdoor sensors face weather, heat and pests, so they fail more often than indoor sensors over the life of a system.
Which codes relate to the outdoor fan?
- 1A means the outdoor fan motor has a problem.
Leaves, ice, worn bearings and failed motors cause most outdoor fan faults. Because the outdoor fan protects the compressor, the system stops quickly when it fails.
Which codes relate to the compressor and inverter drive?
These codes come from the outdoor inverter and the compressor.
- 14 means the inverter tripped on low voltage or short circuit protection.
- 16 means the board lost track of the compressor rotor position.
- 17 means the board detected compressor current while the compressor should be off.
- 1C means the compressor drive circuit has a fault.
- 1d means the compressor drew locked rotor current.
- 1E means the compressor discharge temperature climbed too high.
- 1F means compressor current stayed too high after current release.
These codes range from simple fixes, such as a dirty coil or loose terminal, to major repairs such as a board or compressor replacement. Careful testing tells them apart.
Which codes need urgent attention?
Any code that returns after a restart deserves a booking. Still, some situations call for prompt action. Switch off and call quickly if you see compressor codes such as 1C, 1d or 14 repeating, if the outdoor unit hums and stops again and again, or if you smell burning near either unit. Also act fast on water leaking from the indoor unit alongside a board code such as 12.
Why do Toshiba units use lamps instead of a display?
Many Toshiba wall splits have a clean front panel with a few small indicator lamps rather than a full display. That design keeps the unit discreet on the wall. When a fault occurs, the lamps flash in a recognisable pattern to tell you something needs attention, while the remote reveals the exact code.
Some newer models and those with wifi control may also show alerts in an app. Still, the remote method remains the most reliable way to read the stored check code on most RAS units.
How do sensor codes differ from fault codes?
Sensor codes, such as 0C, 0d, 18, 19 and 1b, mean the board cannot trust a temperature reading. Usually, the fix involves a small sensor, its lead or its plug. Fault codes for parts that do real work, such as the fans and compressor, can involve larger repairs. Knowing which group your code belongs to gives you a rough sense of what lies ahead before the technician arrives.
Why do some codes appear only on hot or cold days?
Air conditioners work hardest at the extremes. On hot afternoons, outdoor units face high pressures and temperatures, so compressor current and discharge temperature codes become more likely. On cold mornings, outdoor coils frost up and sensors face freeze and thaw cycles. Problems that stay hidden in mild weather often reveal themselves at those times.
So when you note a code, note the weather too. That simple detail can save diagnosis time.
Can a code clear itself?
Some codes clear when the condition passes, such as an outdoor fan that frees itself once ice melts. Others stay stored until a technician clears them or the power goes off. Even when a code clears, the cause usually remains, so it tends to return. A code that comes and goes still deserves a check, ideally before the next heatwave or cold snap.
What should you do when a code appears?
A simple sequence works well.
- Note which lamps flash on the indoor unit.
- Read the code with the CHECK button if you can.
- Turn the unit off with the remote and wait several minutes.
- Check the breaker and the outdoor isolator.
- Restart once.
- If the code returns, leave the unit off and book a technician.
Our reset guide explains a safe restart in more detail.
Why avoid repeated resets?
A code is the system protecting itself. Resetting over and over sends power through parts that may already have damage, which can turn a modest repair into an expensive one. This matters most with compressor and drive codes. One careful restart is enough.
Do codes always mean a part has failed?
No. Some codes come from conditions around the system, such as a dirty outdoor coil, a blocked filter, low supply voltage on a hot day or ice on a cold morning. Fixing those conditions often clears the code for good. That is why a good technician tests before replacing parts.
Does the season change which codes appear?
Yes. Summer brings more compressor and discharge temperature codes, such as 1E and 1F, because outdoor units work hardest on hot afternoons. Winter brings more outdoor sensor and defrost related problems, such as 1b, along with outdoor fan faults from ice. Storm season brings communication and board codes after power surges.
What if more than one code appears?
Sometimes the remote shows several stored codes, or different codes appear on different days. In that case, note them all. Related codes often share a root cause, such as a damaged outdoor board or a refrigerant leak. The technician uses the combination to narrow down the problem.
What information should you record with a code?
Along with the code itself, a few details make a big difference. Write down the date and time, the mode you were using and the outdoor weather. Note whether the outdoor unit was running, humming or silent, and whether anything unusual happened beforehand, such as a storm, a power cut, a strange noise or water dripping from the indoor unit.
With that short record, the technician can often narrow the cause before arriving. It also helps with intermittent faults that may not show up at all on the actual day of the visit.
How do codes help the technician?
A code tells the technician where to start, which tools to bring and which parts the job may need. With the code and the model number, they can often check part availability before the visit. That preparation shortens diagnosis and increases the chance of fixing the problem in one trip.
What about Toshiba ducted and cassette units?
Toshiba ducted, cassette and under ceiling units in the RAV range use wired controllers that display codes in a different format, often with letters and numbers. The meanings differ from the RAS wall split codes on this page. If you have a ducted Toshiba, note the code exactly and call us. Our ducted page explains those systems.
Are Toshiba codes covered by warranty?
Warranty depends on the age of the system, the model and the terms that came with it. If your system is still under the manufacturer warranty, check your paperwork first, since warranty repairs usually go through the manufacturer. Otherwise, we can diagnose and quote the repair.
How do you book a Toshiba repair in Sydney?
To book a Toshiba repair anywhere in Sydney, phone 02 9071 1142 or use our booking page. Tell us the code, the model from the indoor unit label and what the system was doing. The technician will come prepared and explain the fix before starting.
You can also read about common symptoms on our problems page and try simple checks in our troubleshooting guides.
Frequently asked questions
How do I read a Toshiba error code?
Press the recessed CHECK button on the remote with a pencil, step through the codes and note the code when the indoor unit beeps.
Will turning the power off clear the code?
It can, so read and note the code before switching off the power.
What do the letters in Toshiba codes mean?
Toshiba codes use digits and the letters A to F, such as 0C, 1A and 1E.
Which Toshiba codes are most serious?
Compressor and drive codes such as 1C, 1d and 14 can involve major repairs, so act on them quickly.
Do ducted Toshiba units use the same codes?
No. Ducted and cassette units with wired controllers use a different format.
How do I book a technician?
Phone 02 9071 1142 with the code, model and symptoms.